M180 Electromechanical Timer

Minimum Order Size: 144

battery charger electromechanical timer

The Model 180 is miniature in dimensions, but it offers two single-pole, single-throw (SPST) or single-pole, double-throw (SPDT) switches, each available with a double-upper switch. All circuits are rated 15 amperes. Termination is designed to accept a standard one piece terminal plug for quick plug on wiring hook up. Contact Midwest Timer Service today to learn more.

The Model 180 electromechanical timer is often used as a battery charger timer switch. Though most commonly used in battery chargers, Model 180 also has a variety of other applications.

M180 Specifications 
 Switches  15 amp 125/250 VAC; 1/3 HP, 125/250 VAC.
 Terminals .250" (6.35) x .034" (.86) male spade with foldover construction. 
Time Ranges Many standard cycle times and operating intervals available. 
 Motor 

Permanent magnet, 24 VAC, 115 VAC or 230 VAC nominal voltage inputs at 50 Hz, 60 Hz or 50/60 Hz. Motor leads 4" (101.6) long with .250" (6.35) stripped ends standard. Internally connected leads optional.

Shaft Rotation

Clockwise or counterclockwise bi-directional friction clutch standard.

Shaft Extensions

.248" (6.3) diameter molded shaft extending .854" (21.64) from the mounting surface with .375" (9.35) long flat, .2055" (5.22) thick. 

Mounting 

Either 3/8" (9.53) -32 threaded bushing with .180" (4.57) diameter anti-rotation boss or two. .116" (2.95) diameter holes on 1.125" (28.58) centers to accept #6-20 self-tapping, thread cutting (type 25) screws. 

Agency Listings UL recognized and CSA certified.
Applications Battery charger timers, countertop appliances, beauty and medical equipment. 

Minimum Order Size 144 timers