M123
The M123 timer features fixed cams for applications requiring more
than one actuation per 360 degrees of cam rotation. From one to three
single-pole single-throw (SPST) or single-pole double-throw (SPDT)
15 or 21 amp "snap action" switches may be specified.
(Note: Numbers in parentheses are millimeters.)
Specifications
Switches: 15 amp, 1/2 HP 125/250 VAC or 21 amp,
1 HP 125/250 VAC
Termination: .187" (4.75) or .250" (6.35)
male spade terminals
Time ranges: Cycle times ranging from 10 seconds
to 36 hours are available
Motor: Permanent magnet, ranging from 24 VAC to
230 VAC, 60 Hz (also 50 Hz). Motor leads to any length with terminals
to your specifications.
Shaft rotation: Clockwise standard. Low torque
one-way clutch for manual setting
Shaft extension: .250" (6.35) diameter steel
shaft
Mounting: Two #6-32 tapped through-holes adjacent
to the shaft
Agency listings: UL recognized and CSA certified
Applications: Commercial air conditioning, heat
pumps, and laundry
(Note: Drawing below
depicts one-cam timer.)
|
|
|
