M180
The M180 timer measures 2" x 2.5" with a depth of 1.78"
(50.8 x 79.38 x 45.2), but it offers two single-pole, single-throw
(SPST) or single-pole, double-throw (SPDT) switches, each available
with a double-upper switch. All circuits are rated 15 amps. Termination
is designed to accept a standard one-piece terminal plug for quick
plug-on wiring hook-up. Options include internal terminal bussing,
one or two 4-way, .250" (6.35) x .032" (.81) male convenience
(dummy) terminals, internal motor lead connections, positive stop
for one-way setting (two-way setting standard), and non-timed "hold"
position.
(Note: Numbers in parentheses are millimeters.)
Specifications
Switches: 15 amp, 125/250 VAC, 1/3HP 125/250 VAC
Termination: .250" (6.35) x .034" (.86)
male spade with foldover construction
Time ranges: Many standard cycle times and operating
intervals available
Motor: Permanent magnet, ranging from 24 VAC to
230 VAC, 60 Hz (also 50 Hz). Motor leads to any length with terminals
to your specifications.
Shaft rotation: Clockwise or counterclockwise,
with bi-directional friction clutch standard
Shaft extension: .250" (6.35) diameter molded
shaft extending .854" (21.64) from the mounting surface with
.375" (9.53) flat, .2055" (5.22) thick.
Mounting: Either 3/8-32 threaded bushing with .180"
(4.57) diameter anti-rotation boss or two .116" (2.95) diameter
through-holes on 1.125" (28.58) centers to accept #6-20 self-tapping,
thread-cutting screws.
Agency listings: UL recognized and CSA certified
Applications: Countertop appliances, beauty and
medical equipment, battery chargers.
|
|
|
