M182
The M182 timer is an economical choice for dependable continuous repeat
cycle timing. It utilizes a single cam that provides SPDT switching
of current loads up to 9 amps, 125 VAC. The fixed cam controls two
circuits within a cycle. Common cycle times are 6, 8, 10, or 12 hours.
Switch closure time within the cycle can be as low as 1% to a maximum
of approximately 10% of the total cycle time. The enclosed housing
design eliminates the need for external grounding.
(Note: Numbers in parentheses are millimeters.)
Specifications
Switches: 9 amp, 125 VAC 60 Hz or 4.5 amp 250 VAC
50 Hz 1/3 HP 125 VAC 60 Hz or 1/3 HP 250 VAC 50 Hz
15 amp, 125 VAC 60 Hz or 7.5 amp 250 VAC 50 Hz
1/2 HP 120 VAC 60 Hz or 250 VAC 50 Hz
Termination: .250" (6.35) x .032" (.81)
male spade with foldover construction
Time ranges: Cycle times from 3 to 24 hours, including
common cycle times of 6, 8, 10, and 12 hours.
Motor: Permanent magnet, 1/4 watt, 120 VAC, 60
Hz or 230 VAC, 50 Hz
Shaft rotation: Clockwise
Shaft extension: Semi-flush with tapered surface
for one-way manual rotation or extended hub
Mounting: Two
.127" (3.23) diameter through-holes to accept #6 self-tapping,
thread-cutting screws, or two .187" (4.75) through-holes.
Agency listings: UL, CSA, cRUus and SEMKO
Applications: Refrigeration defrost timing, freezers,
and ice merchandisers
|
|
|
